With 3.1 million units in stock and nearly 40% of vehicles over 10 years old: the European trailer brake replacement market is undervalued

There is a frequently overlooked fact regarding the European trailer market: what truly drives demand for braking systems is not the sales volume of new trailers, but the age of the existing fleet.

According to an analysis of the European trailer market published by ING in January 2026, the total number of trailers in service across the EU, EFTA, and the United Kingdom was approximately 3.1 million in 2024, representing an increase of about 1% over the previous year. Although deliveries of new trailers from multiple countries in 2025 fell to 60%–80% of pre-pandemic levels, the number of trailers in service did not decline. More importantly, the structure is different: data from the Dutch fleet—often regarded as a reliable barometer—show that nearly 40% of trailers have been in service for 10 years or more, while ING estimates that the overall average age of trailers in Europe may be even higher. When a fleet is sufficiently aged, replacement is no longer a “optional measure.” Low sales of new trailers do not mean that demand for replacement brakes is shrinking; on the contrary, the older the existing fleet, the more inelastic replacement demand becomes.

From the perspective of market size, this assessment is supported by data. According to estimates by IndexBox, the EU automotive braking friction products market will be worth approximately €4.2–4.8 billion in 2026 and is expected to rise to €5–5.8 billion by 2035. The after-sales market is the primary growth driver, with an annual growth rate ranging from 1.8% to 2.6%, while OE demand remains essentially flat. Another more macro-level figure indicates that Europe consumes over 100 million brake pads annually, with replacement demand exceeding 50 million units—driven by a fleet of more than 250 million vehicles in service. Trailer brakes represent only one segment of this market, but the underlying logic is the same: the maintenance and replacement of existing vehicle fleets create a sustained and predictable demand stream.

The entry barrier for this market lies in the certification process.

ECE R90 has been mandatorily implemented throughout the European Union since April 2001; brake lining replacements must meet this certification requirement in order to be legally marketed in member states. For brands and suppliers seeking entry into the European trailer brake replacement market, ECE R90 is not merely an “additional advantage”; it is a “entry ticket.” Without it, a product has no standing whatsoever for compliant marketing.

The position of Chiheng in this market segment is primarily founded on the integrity of its certifications. The company holds domestic CCC certification (Certificate No.: 2023091120020872), U.S. DOT FMVSS certification, and European ECE R90 type approval, covering M1, M2, N1, N2, and O1 vehicle classes; the trailer category is explicitly included. In 2024, the company was recognized as a National High-Tech Enterprise (Certificate No.: GR202437005279), and its management system passed ISO 9001:2015 certification (Certificate No.: 10423Q01892R0S). Few domestic brake component manufacturers hold all three major market access certifications simultaneously; this means that Chiheng’s drum brake pads and brake shoe liners can enter the compliant distribution system of the European replacement market directly.

However, certification addresses the question of “whether the product can be sold”; what truly determines the reputation of the replacement market is “how it performs after being installed.” The European replacement market is characterized by a large number of SKUs, batch sizes that are not necessarily large, and extremely stringent requirements for quality consistency. End-user repair shops and fleet operators will not give a brake pad a second chance—fluctuations in the coefficient of friction, abnormal noise, or premature wear; if any of these issues arise, the next order will not come back.

The durable drum brake pads utilize a proprietary asbestos-free friction material formulation, with a cold-state friction coefficient of 0.38–0.42, a hot-state coefficient of ≥0.35, a wear rate of 0.3–0.5 cm³/MJ, and an incidence of braking noise below 0.3%. The measured shear strength of the brake shoes reaches over 350 N/cm², exceeding the mandatory requirement of ≥250 N/cm² under the ECE R90 regulations. This 40% margin provides a tangible safety buffer under frequent trailer start-stop cycles and heavy-load operating conditions. Each product is assigned an independent traceability code, enabling reverse tracing from the finished product back to the raw-material batch and production parameters; the batch consistency CPK value is ≥1.33.

These capabilities have been practically validated by European customers. Hengwei has delivered more than 2 million drum brake pads to one of Europe’s top five auto parts chains, while maintaining a customer complaint rate below 0.1%; the customer has been awarded the “Best Quality Supplier” title for two consecutive years. This customer operates across more than ten countries, including Germany, France, and the United Kingdom, and is far more sensitive to quality consistency in the replacement market than typical purchasers.

Another trend deserves attention. IndexBox forecasts that by 2035, imported products could account for 42%–48% of the post-sale market for braking and friction products in the European Union; the driving factor is the improvement in the quality and ECE R90 compliance capabilities of low-cost manufacturing bases. In other words, European replacement markets are structurally becoming more receptive to compliant and stable Asian suppliers. Holding Heng’s brand positioning for 2026 is to move into the spotlight and provide direct services to global brand owners and distributors—this timing coincides precisely with this window of structural change.

The size of the European trailer brake replacement market is indeed larger than many people imagine. However, it is not a market where “anyone can enter.” ECE R90 is the first filter; batch consistency is the second; and delivery stability is the third. Hengcheng has verifiable data across all three filters, rather than merely a single promotional leaflet.

Need Help Finding the Right Parts?

Tell us what parts you need or share your trailer specifications. We will help you confirm suitable options for repair, replacement, or bulk purchase.

Lastest Posts

Request a Quote